菲希尔涡流探头FTA3.3H 返回列表页

菲希尔涡流探头FTA3.3H

ISOSCOPE  FMP10涡流涂层测厚仪标准配置：ISOSCOPE  FMP10主机+FTA-3.3H涡流探头

DELTASCOPE FMP10 为磁性涂层测厚仪，订货号：604-301
ISOSCOPE FMP10为涡流涂层测厚仪，订货号：604-298
DUALSCOPE FMP20为磁性/涡流涂层测厚仪，订货号：604-285
DELTASCOPE FMP30为磁性涂层测厚仪，订货号：604-297
ISOSCOPE FMP30为涡流涂层测厚仪，订货号：604-299
DUALSCOPE FMP40为磁性/涡流双功能涂层测厚仪，订货号：604-286

常用涡流探头：FTA3.3H，订货号：604-142，测量范围：0 - 1200 μm

Characteristic Features of the ISOSCOPE FMP10-30:For all eddy current probes 
Features additional to those of the basic series:

Memory for up to 20,000 readings

Up to 100 calibratable applications

Capability of allocating readings into up to 4,000 Blocks

Date and time stamp for blocks

Statistics display of common characteristic values in the block and final results. Output of characteristic variance-analytical values

Graphical measurement display as a histogram with a Gaussian plot

Capability of entering process tolerance limits and computation of the associated process capability indices cp and cpk

Audible and visual warning when tolerance limits are exceeded

Free-running display with additional presentation of the reading as an analog bar between the tolerance limits

External key-triggered measurement acquisition, e.g., in hollow cylinders with small diameters

Capability to enable matrix measurement mode for connected multi-point measurements

Capability of averaging measurement data: Only the mean value of several readings will be stored

Measurement acquisition through area measurement possible: Only the single readings until probe lift-off are captured and averaged

Capability to measure continuously with the probe placed on the specimen

Outlier rejection for the automatic elimination of erroneous measurements

Correction of any stored reading

Application linking mode: Ability for common normalization/calibration of applications

Designations for applications through the optional PC program MP-Name

USB port to a printer

Battery and line power operation