送纸部分采用抽纸皮带进行底部抽纸，去除离合控制方式。以此实现不停机连续加纸，间断式皮带输送采用伺服控制，根据纸张长短可调整间断输送长短，多条输送皮带都装有齿轮和齿条装置，可调整皮带的左右位置。

The paper feed part adopts the paper belt to draw paper at the bottom to remove the clutch control mode.To achieve non-stop continuous sheet, intermittent type belt conveyor adopts servo control, adjust continuous conveyor length, according to the length of the paper is more than conveying belt is equipped with gear and rack device, adjustable strap around the place

印胶部分采用柔性模版印胶，模版形状可根据产品需要刻制。安装模版的辊刻有基准线，安装模版需准确、方便、快捷，印胶左右位置可随意调整，前后位置调整采用正位调整器调整，可不停机调整印胶的前后左右位置。

The printing part adopts the flexible template printing glue, the template shape can be made according to the product needs.Installation template roll engraved with baseline, template to be accurate, convenient, fast, about the rubber position can be adjusted freely, before and after the position adjustment adopts is a regulator, adjust position around the rubber can not stop.

贴膜部分采用伺服调速装置，由电脑直接输入调整，能保证不停机调整膜的长短。采用辊刀自动裁切膜的长短；自动压出膜的锯齿线，自动分切膜的开口，采用吸气管辊将膜吸贴到纸盒上，可不停机调整膜前后左右位置。

The tape part adopts the servo speed control device, which can be adjusted directly by the computer to guarantee the length of the film.Using roller cutter to automatically cut the length of the film;Automatically press the serrated line of the film, automatically cut the opening of the film, and apply the suction pipe roller to attach the film to the carton.

加工示意图Processing diagram：

配置单Single configuration：