MZ磁力驱动自吸泵
MZ Magnetic Driven Self-Priming Pump
MZ型磁力驱动自吸泵,主要是为容器和槽车卸载而设计的,用于液槽抽排、罐车卸货,确保排出进口管路中的空气迅速引液,可供输送液态烃、汽油、煤油、柴油等石油产品和化工、制药等行业易燃易爆、有毒有害的液体,尤其适用于船用油泵和陆地油库、油罐车的装卸用泵。
MZ magnetic driven self-priming pump is designed mainly for unloading vessels and tanker cars, to ensure quick priming by removing the air in the inlet and discharge piping; it can convey petrochemical products such as liquid hydrocarbon, gasoline, kerosene and diesel oil and inflammable and explosive, toxic and harmful liquid in chemical and pharmaceutical industries, and is especially suitable as vessel oil pump and handling pumps for onshore oil depot and oil tankers.
结构说明 Description of structure
1.卧式、外混式、自吸性能好。
2.磁力驱动、全密封、无泄漏。
3.泵体采用底脚支撑,轴向吸入、径向排出。
4.叶轮为闭式叶轮,轴向力主要采用背叶片平衡,残余轴向力由滑动轴承承受。
5.当液体在泵内循环时间较长时,为防止内部循环液的温度升高,可设置温控保护装置。
6.管路中不需安装底阀,工作前只需保留泵体内储有定量引液即可。
7.后拉出式设计,可以不动进出口管路,即可维修,使用方便。
8.可采用与电机直连或膜片式联轴器连接的形式。
1.Horizontal and external mixing type, with good self-priming performance.
2.Magnetic driven, fully enclosed and leakage free.
3.The body is supported with feet, with axial suction and radial discharge.
4.The impeller is enclosed type; the axial load is balanced mainly with back vane, and the residual axial load is taken by sliding bearings.
5.When liquid circulates within the pump for a long time, to prevent heating up of such circulating liquid, temperature control protection device can be provided.
6.It is not necessary to install a bottom valve in the piping, and before operation, it is only required to have given amount of priming liquid within the pump body.
7.It is in rear pull-out design, so maintenance can be done without involving the inlet and discharge piping, convenient in use.
8.Either direct driving by motor or connection via diaphragm coupling can be used.
性能范围 The main specifications
流量 Capacity 1.6~400m3/h
扬程 Head 20~125m
介质温度 Temperature -20℃~+120℃
进口直径 Import diameter 25~200mm
工作压力 The max working pressure 1.6MPa
型号意义 Type denotation
泵常用材料 Common pump materials
标准性能表 Standard performance table
所有评论仅代表网友意见,与本站立场无关。