本机是我厂在原有压刨型的基础上经改造的新机型，本机能适应加工超薄和超短的木料，消除了切头切尾的现象，加工表面光滑，前后送料压辊与刀轴的距离可随意调整。在后送料压辊之后增设了一根辅助压辊，减少了后送料压辊的负荷。
机身是铸铁整体铸造，铸铁工作台，结构牢固，整机外形美观，结构轻巧，运转平稳，噪音低，操作和维修方便。
| 技术参数Technical parmeters | MB106A |
| 刨削宽度 Max.width of planing workpieces | 630mm |
| 刨削厚度Max.thickness of planing workpieces | 200mm |
| 最小刨削厚度Min.thickness of planing workpieces | 10mm |
| 最小刨削长度Max.thickness planing workpieces | 300mm |
| 每次刨削量 Max.Capacity of planing once wor kpiece | 10mm |
| 送料速度Feed speed | 8,12,16,24m/min |
| 毛料厚度差（同时送料）Max.difference of thickness between wood pieces | 2mm |
| 刀轴切削直径Cutting diameter of cutter | Φ125mm |
| 刀轴转速Revolution speed of top &bottom cutters | 4600r/min |
| 刀轴切削速度Cutting speed of cutter | 30m/s |
| 工作台升降速度Lifting speed of work table | 125mm/min |
| 电动机功率Power of motors |
|
| 主轴电机Motor of main spindle | 7.5kw |
| 送料电机For feed unit | 1.5/2.4kw |
| 升降电机Fox lifting mechanism of feed unit | 370w |
| 机床外形尺寸（长*宽*高）Overalldimensions(L*W*H) | 1434*1355*1200mm |
| 重量Weight | 1390kg |
所有评论仅代表网友意见，与本站立场无关。