WZN-9019 汽车座椅假人

此 H 点装置依据：

SAE J4002-2010 GB/T 11563.2 GB/T 29120-2012 ISO 20176:2006 标准生产。

The H-point is producd according to the standard：

SAE J4002-2010 GB/T 11563.2 GB/T 29120-2012 ISO 20176:2006.

HPM 是用于建立车辆关键基准点和尺寸的物理装置

H 点装置提供了一种乘员乘坐空间和/或座椅的可靠的布置与测量的方法。

The HPM is a physical tool used to establish key reference points and measurements in a Vehicle These H-point devices provide a method for reliable layout and measurement of occupant seating compartments and/or seats.

产品技术资料：

背模、臀模材质：铸造铝合金

配重块：钢铁镀镍

其它部件：不锈钢，铝材

水平仪测量精度： 1°

量角器测量精度： 0.05°

砝码精度： ±0.03kg

尺寸精度： 1mm

Product technical documents

Back Pan, Cushion Pan：Cast aluminium alloy

Clump Weights：Nickel plated steel

Other Parts：Stainless steel

Electronic Level Accuracy：1°

Protractor Accuracy：0.05°

Weights Accuracy：±0.03kg

Size Accuracy： 1m

A. 背板总成

背板总成由背板的胸部、腰部、和骨盆组成。它包括以下的零件：

把手

躯干铰接锁止杆

H 点枢轴（位于 H 点支撑座上）

载荷施加点(弹簧加载探头容器)

躯干角度测量台

上部重块悬挂架

下部重块悬挂架

Back Pan Assembly

The back pan assembly consists of the back pan with its thoracic, lumbar, and pelvic segments. It contains the following parts：

Handle

Torso articulation locking lever

H-point pivot shaft (sits on H-point saddle)

Load application point (receptacle for spring-loaded probe)

Torso angle inclinometer land

Upper weight rack

Lower weight rack

座板总成

座板总成包括：

座板

把手

带有骨盆重块位置的

H 点杆

连接背板的锁止衬套

连接大腿的锁止衬套

弹簧探头载荷施加点

侧向水平仪

大腿重块安装台和安装销

B. Cushion Pan

The cushion pan assembly contains：

Cushion pan

Handle

H-point saddle with pelvic weight locations

H-point rods

Locking bushings for attaching back pan

Locking bushings for attaching thigh segment

Load application point for spring probe

Lateral level

Thigh weight platform and locating pins

小腿部分

小腿部分包括：

膝部枢轴安装槽

腿长标尺

腿长锁销

腿长锁止螺钉

膝部角度尺

小腿角度测量台

Lower Leg Segment

The lower leg segment includes：

Knee pivot slot

Leg length scale

Leg length locking pin

Leg length locking screws

Knee angle scale

Lower leg angle inclinometer land

鞋具和鞋固定装置

鞋具上有跖球（BOF）、鞋后跟（HOS）和鞋底，它们是使用 H 点装置的关键基准点

或基准面。

鞋具其它零件包括：

锁止螺钉

踝部角度尺

AHP 至 PRP 侧向偏移标尺

踏板平面角度测量台

鞋固定装置用于保持鞋具位于加速踏板上。

2 个水平调节螺钉

气泡水平仪

鞋具安装叉

Shoe Tool and Shoe Fixture

The ball of foot (BOF), heel of shoe (HOS), and bottom of shoe are found on the shoe tool, and are key reference points or surfaces for using the H-point machine. BOF on the shoe tool is located at the zero marking (corner) of the 2 scales on the top surface of the shoe.

Other parts of the shoe tool include：

Locking screw

Ankle angle (typically 87 degrees for the Driver)

AHP to BOFRP lateral offset scale

BOFRP to PCP (pedal contact point) scale

Shoe plane angle inclinometer land

The shoe fixture is used to hold the shoe tool in place on the accelerator.

2 leveling screws

Bubble level

Fork for attaching the shoe tool

D. 大腿部分

大腿部分包括：

锁止衬套（用于连接小腿）

膝部枢轴杆

大腿长度标尺

大腿长度锁止销

大腿长度锁止螺钉

安装叉（用于连接 H 点杆）

小腿侧向位置标尺

大腿角度测量台

Thigh Segment

The thigh segment consists of：

Locking bushing (for attaching lower leg)

Knee pivot rod

Thigh length scales

Thigh length locking pins

Thigh length locking screws

Fork (for attaching to H-point rod)

Lateral leg position scale

Thigh angle inclinometer land

头部空间装置

角度测量台 (躯干角)

角度调整螺钉

探测杆滑动管

有效头部空间标尺

安装叉

E.Headroom Fixture

Inclinometer Lａnd (Torso Angle)

Angle Adjusting Screw

Sliding Tube with Probe

Effective Headroom Scale

Fork

F.LSP 标尺

F.LSP Scale

G. 重量组成三维 H 点假人的重量主要

有三部分构成：臀部、腿部、背部。共有 24 个模块组成，其中包括 12

个背部模块，6 个臀部模块，6 个腿部模块。

Weights The HPM comes with 3 types of weights： pelvic,thigh,ａnd back.

There are 12 back weights, 6 pelvic weights, and 6 thigh weights for a total of 24.

设备姿态参数

鞋底与 XY 平面平行。然而，因为踝部角的测量是从赤脚肌肉线开始，而非鞋底线， 所以，踝部角是 96.5°，而非 90°。

H.POSTURE OF HPM FOR SPECIFICATIONGS

DimensionValue

Torso angle LSP

Cushion Angle Thigh Angle Knee Angle Ankle Angle* Thigh Length

Lower Leg Length

0

0

0

0

90

96.5

456

459

degrees mm degrees degrees degrees degrees mm(SgRP) mm(SgRP)

The bottom of the shoe is flat on the XY plane.However,since ankle angle is measured from the bare foot flesh line,ａnd not the bottom of shoe,the ankle angle will be 96.5 degrees,not 90 degrees.

J. 重量 (单位 Kg)

J.WEIGHTS (IN Kg)