| 型号规格 Specifications | 单位 UNIT | CH150F | ||||
| 号International size rating | 420 | |||||
| 注射装置 INJECTION UNIT | A | B | C | |||
| 螺杆直径 Screw diameter | mm | 36 | 40 | 45 | ||
| 螺杆长径比Screw L/D ratio | L/D | 22 | 20 | 17.8 | ||
| 理论注射容积Theoreticai shot volume | cm3 | 183 | 226 | 286 | ||
| 注射量 Shot weight(PS) | g | 167 | 206 | 261 | ||
| OZ | 5.9 | 7.3 | 9.2 | |||
| 注射压力 Injection pressure | Bar | 2302 | 1865 | 1473 | ||
| 注射速率 Injection rate(PS) | g/s | 92 | 114 | 144 | ||
| 射胶行程 Injection stroke | mm | 180 | ||||
| 螺杆转速 Max.screw speed | rpm | 200 | ||||
| 塑化能力Plasticizing capacity(PS) | g/s | 13.3 | 16.1 | 21.5 | ||
| 射嘴接触力Nozzle sealing force | KN | 53 | ||||
| 锁模装置 CLAMPING UNIT | ||||||
| 锁模力 Clamping force | KN | 1500 | ||||
| 开模行程Opening stroke | mm | 380 | ||||
| 拉杆内间距Distance between tie-bars | mm | 470x420 | ||||
| 最小模具尺寸Min mould dimension | mm | 305x270 | ||||
| 最小模厚 Max.mold height | mm | 450 | ||||
| 最小模厚 Min.mold height | mm | 160 | ||||
| 模板开距MAX.Dalylight | mm | 830 | ||||
| 顶出行程 Ejector stroke | mm | 120 | ||||
| 顶出力 Ejector force | KN | 38 | ||||
| 顶出数 No.of ejector pins | PCS | 4+1 | ||||
| 其它 OTHERS | ||||||
| 系统压力System pressure | Mpa | 16 | ||||
| 油泵排量 Hydraulic pump capacity | CC | 50 | ||||
| 电马达功率Drive mootor power | kw | 15 | ||||
| 电热功率 Heator Power | kw | 7.4 | ||||
| 加热段数 No.of heater zones | pcs | 3+1 | ||||
| 外形尺寸 Machine dimensions(LxWxH) | m | 4.38x1.35x1.90 | ||||
| 理论机重 Machine weight | Tom | 4.8 | ||||
| 邮箱容积 Oil tank capacity | L | 200 | ||||
| 模板正面尺寸图 Platen dimensions | ||||||
| 模板侧面尺寸图 Mould space dimensions | ||||||
所有评论仅代表网友意见，与本站立场无关。