Input

Input Voltage

115 or 230 VAC, 410 Hz +/- 20% are standard (other inputs available upon request)

Input Protection

Internal safety fuse
Inrush current limiting
Varistor
Lower voltage than specifed minimum input will not damage unit

Isolation

2250 Vdc input to ground
2250 Vdc input to output
2250 Vdc output to chassis

Standards

Designed to meet EN60950-1 and related standards

EMI

EN 55022 Class A as a minimum

Output

Output Voltage

115V / 60Hz / 2.2A or 115V / 400Hz / 2.2A or
230V / 50Hz / 1.1A continuous with grounded neutral
Isolated floating output optional

Output Wave Form

Sinusoidal

Total Harmonic Distortion

Less than 5% at full load

Line/Load Regulation

± 2% from no load to full load

Load Crest Factor

Maximum 3.0 at 90% load

Output Noise

High frequency ripple is less than 500mV rms (20MHz BW)

Output Overload Protection

Current limiting with short circuit protection. At approximay 300VA unit enter cycling (hiccup)
mode. Thermal shutdown with automatic recovery in case of insuffcient cooling

Output Overvoltage Protection

140Vac by internal supply voltage limiting

Effciency

Min 80% at full load

Environmental Specifcations

Operating Temperature Range

0°C to +50°C

Temperature Drift

0.05% per °C over operating temperature range

Cooling

Conduction/convection

Environmental Protection

Basic ruggedizing, Conformal coating

Shock/Vibration

IEC 61373 Cat 1 A&B

Humidity

5 - 95% non-condensing

MTBF

110,000 hours @ 45°C

Indicators

output ON LED

Control Input

None

Alarm Output

None

Mechanical Specifcations

Package / Dimensions (W x H x L)

F3: 132 x 64 x 300mm (5.2" x 2.5" x 11.8"). Mounting holes are clear

Weight

2kg (4.4lbs)

Connections

12-pole barrier-type terminal block,3/8” spacing. Snap-on cover included.

Warranty

3 years